powerIO® offers all necessary components from one source
Products for the decentralized installation of building automation
T1.B100 powerIO®-Box
Your multifunctional automation box! The heart of the powerIO®-Systems.
T1.L100 powerIO®-Line
Discover our powerIO®-Line and transfer power and Ethernet communication with only one line.
T1.D100 powerIO®-Bluetooth Dongle
The powerIO®-Bluetooth Dongle is plugged into the powerIO®-Box and allows you to connect to the powerIO®-App.
T1.S110 powerIO®-StartUnit
The powerIO®-StartUnit can be directly connected to the powerIO®-Line. The powerIO®-StartUnit can be installed for example in a switch cabinet.
powerIO®-Starter Set
Unsure? Then the Starter Set is exactly the right thing! Everything you need to get started!
T1.Rxxx powerIO®-Rio
The powerIO®-Rio Box is an expansion box with classic digital and analog inputs and outputs. It is used to connect non-communicative devices.
Neugierig?
Entdecken Sie alle Vorteile und Funktionen des powerIO®-Systems!
T1.BSK Fire dampers modules
Discover our fire dampers modules. These complete the powerIO®-system.
T1.Z122 M12 A-coded 5-pin Y-distributor plug <-> 2x socket
Allows two M12 plugs to be connected to one socket. Bus and voltage bridged. Can be plugged directly into the powerIO box to connect two sensors/actuators.
T1.Y100 powerIO®-Y
Discover our powerIO®-Y, which serves as your distributor.
T1.Z10X M12 Connection cable
Discover our M12 connection cables.
T1.Z119 powerIO®-Aluminium mounting plate
Discover our powerIO®-aluminum mounting plate. It enables a relaxed pre-assembly.
T1.C100-ETH powerIO®-Expansion board: Ethernet
Discover our powerIO®-Expansion board: Ethernet.
T1.C100-RS232-24 powerIO®-Expansion board: RS232
Discover our powerIO®-extension board: RS232.
T1.C100-RS485-24 powerIO®-Expansion board RS485
Discover our powerIO®-extension board: RS485.
T1.Z102 RJ45 plug - M12 D-coded 4-pin plug
Ethernet cable for direct connection to the powerIO® additional board "Ethernet". Attention: Do not connect to the service port (port 6) of the powerIO-box T1.B100!
T1.Z101 powerIO®-Ethernet connector
4-pin Ethernet connector for connecting the powerIO®-Line to the powerIO®- Box or powerIO®-Start Unit.
T1.Z114 flange plug M12 5-pin A-coded, front wall mounting
For installation in sensors or own assemblies.
T.Z113 flange coupling M12 5-pin A-coded, front wall mounting
For installation in sensors or own assemblies.
T.Z117 M12 protective cap
Protective cap against water and dust for unused M12 sockets e.g. on the powerIO®-Box.
T.Z116 flange plug M12 5-pin A-coded, rear wall mounting
For installation in sensors or own assemblies.
T.Z112 plug M12 5-pin A-coded
Plug for self-assembly.
T.Z115 flange coupling M12 5-pin A-coded, rear wall mounting
For installation in sensors or own assemblies.
T1.Z111 Coupling M12 5-pin A-coded
Socket for self-assembly.
T1.Z110 M12 A-coded 5-pin Y-adapter
Enables the ready to plug in bridging of M12 connections (socket/plug).
T1.Z100 Shield clamp
For shield connection of the powerIO®-Line to the powerIO®-Box. Included with the powerIO®-Box.
powerIO®-System
Here you can find more information about our system.
powerIO®-Support
Downloads, explanatory videos and more. Here you will find answers to your questions.
powerIO®-Contact
Please contact us. We are looking forward to you!
powerIO®-Demo case
Request your free demo case here.
powerIO GmbH
Eberhardstr. 65, 70173 Stuttgart
0711 99887200
office@powerio.com